Table of Contents
Advertisement
reauthentication of the supplicant takes place. The reauthentication period must be a value
in the range of 1 and 65535. The default value is 3600. Changing the value will not change
the configuration until the Submit button is pressed.
Reauthentication Enabled - This select field allows the user to enable or disable
reauthentication of the supplicant for the specified port. The selectable values are 'true' and
'false'. If the value is 'true' reauthentication will occur. Otherwise, reauthentication will not be
allowed. The default value is false. Changing the selection will not change the configuration
until the Submit button is pressed.
Command Buttons
Initialize - This button begins the initialization sequence on the selected port. This button is
only selectable if the control mode is is 'auto'. If the button is not selectable, it will be grayed
out. Once this button is pressed, the action is immediate. It is not required to press the
Submit button for the action to occur.
Reauthenticate - This button begins the reauthentication sequence on the selected port.
This button is only selectable if the control mode is is 'auto'. If the button is not selectable, it
will be grayed out. Once this button is pressed, the action is immediate. It is not required to
press the Submit button for the action to occur.
Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a save is
performed.
Refresh - Update the information on the page.
Initialize - This button begins the initialization sequence on the selected port. This button is
only selectable if the control mode is is 'auto'. If the button is not selectable, it will be grayed
out. Once this button is pressed, the action is immediate. It is not required to press the
Submit button for the action to occur.
Reauthenticate - This button begins the reauthentication sequence on the selected port.
This button is only selectable if the control mode is is 'auto'. If the button is not selectable, it
will be grayed out. Once this button is pressed, the action is immediate. It is not required to
press the Submit button for the action to occur.
Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a save is
performed.
Refresh - Update the information on the page.
Advertisement
Table of Contents
