Table of Contents
Advertisement
▫
Default
Enabled
▫
Format
port-channel linktrap {<logical slot/port> | all}
▫
Mode
Global Config
8.6.17.1 no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot
and port for a configured port-channel. The option all sets every configured port-channel with the same
administrative mode setting.
▫
Format
no port-channel linktrap {<logical slot/port> | all}
▫
Mode
GlobalConfig
8.6.18 port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot and port for a
configured port-channel, and name is an alphanumeric string up to 15 characters. This command is used
to modify the name that was associated with the port-channel when it was created.
▫
Format
port-channel name {<logical slot/port> | all} <name>
▫
Mode
Global Config
8.6.19 protocol group
This command attaches a <vlanid> to the protocol-based VLAN identified by <groupid>. A group may
only be associated with one VLAN at a time; however the VLAN association can be changed.
▫
Default
none
▫
Format
protocol group <groupid> <vlanid>
▫
Mode
VLAN database
8.6.19.1 no protocol group
This command removes the <vlanid> from this protocol-based VLAN group that is identified by this
<groupid>.
▫
Format
no protocol group <groupid> <vlanid>
▫
Mode
VLAN database
8.6.20 protocol vlan group
This command adds the physical <slot/port> interface to the protocol-based VLAN identified by
<groupid>. A group may have more than one interface associated with it. Each interface and protocol
combination can only be associated with one group. If adding an interface to a group causes any conflicts
with protocols currently associated with the group, this command will fail and the interface(s) will not be
added to the group.
▫
Default
none
Advertisement
Table of Contents
