Class-Map Rename; Match Any; Match Class-Map - Planet WGSW-24000 User Manual

9.4.2 class-map rename

This command changes the name of a DiffServ class. The <classname> is the name of an existing
DiffServ class. The <newclassname> parameter is a case-sensitive alphanumeric string from 1 to 31
characters uniquely identifying the class (Note: the class name 'default' is reserved and must not be used
here).
▫
Default None
▫
Format class-map rename <classname> <newclassname>
▫
Mode Global Config

9.4.3 match any

This command adds to the specified class definition a match condition whereby all packets are
considered to belong to the class. The optional [not] parameter has the effect of negating this match
condition for the class (i.e., none of the packets are considered to belong to the class).
▫
Default None
▫
Format match [not] any
▫
Mode Class-Map Config

9.4.4 match class-map

This command adds to the specified class definition the set of match conditions defined for another class.
The <refclassname> is the name of an existing DiffServ class whose match conditions are being
referenced by the specified class definition.
There is no [not] option for this match command.
Note
:
▫
Default None
▫
Format match class-map <refclassname>
▫
Mode Class-Map Config
Restrictions - The class types of both <classname> and <refclassname> must be identical (i.e., any vs.
any, or all vs. all). A class type of acl is not supported by this command. Cannot specify <refclassname>
the same as <classname> (i.e., self-referencing of class name not allowed).
At most one other class may be referenced by a class.
Any attempt to delete the <refclassname> class while still referenced by any <classname> shall fail.
The combined match criteria of <classname> and <refclassname> must be an allowed combination
based on the class type. Any subsequent changes to the <refclassname> class match criteria must
maintain this validity, or the change attempt shall fail.
The total number of class rules formed by the complete reference class chain (includes both predecessor
and successor classes) must not exceed a platform-specific maximum.
In some cases, each removal of a refclass rule reduces the maximum number of available rules in the
class definition by one.