Spanning Tree Protocol Port Configuration - Planet WSW-2620 Manual

Console Management
•
Role of STP Bridge Read only. States whether or not the
STP bridge is acting as the root bridge.

Spanning Tree Protocol Port Configuration

Figure 5.27 Spanning Tree Protocol Port Control/Status Menu
This menu allows you to monitor and configure the STP settings for
each of the switch's ports.
The settings are defined as:
•
Port ID Read only. States which port the settings are for.
Scroll through the ports by selecting PREV PORT or NEXT
PORT.
•
STP Port ID Read only. States the designated bridge port ID
for the current port's VLAN.
•
STP Port Designated Root Read only. States the bridge
identifier of the root bridge.
•
STP Port Designated Cost Read only. States the path cost of
the designated port of the segment connected to the given port.
5-35