Snmp-Server Community Ipaddr; Snmp-Server Community Ipmask - Planet WGSW-24000 User Manual

entries using the same community name, the first entry is kept and processed and all duplicate entries
are ignored.
▫ Two default community names: Public and Private. You can replace these default
Default
community names with unique identifiers for each community. The default values for the remaining
four community names are blank.
▫
Format snmp-server community <name>
▫
Mode Global Config
8.5.20.1 no snmp-server community
This command removes this community name from the table. The name is the community name to be
deleted.
▫
Format no snmp-server community <name>
▫
Mode Global Config

8.5.21 snmp-server community ipaddr

This command sets a client IP address for an SNMP community. The address is the associated
community SNMP packet sending address and is used along with the client IP mask value to denote a
range of IP addresses from which SNMP clients may use that community to access the device. A value of
0.0.0.0 allows access from any IP address. Otherwise, this value is ANDed with the mask to determine
the range of allowed client IP addresses. The name is the applicable community name.
▫
Default 0.0.0.0
▫
Format snmp-server community ipaddr <ipaddr> <name>
▫
Mode Global Config
8.5.21.1 no snmp-server community ipaddr
This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the applicable
community name.
▫
Format no snmp-server community ipaddr <name>
▫
Mode Global Config

8.5.22 snmp-server community ipmask

This command sets a client IP mask for an SNMP community. The address is the associated community
SNMP packet sending address and is used along with the client IP address value to denote a range of IP
addresses from which SNMP clients may use that community to access the device. A value of
255.255.255.255 will allow access from only one station, and will use that machine's IP address for the
client IP Address. A value of 0.0.0.0 will allow access from any IP address. The name is the applicable
community name.
▫ 0.0.0.0
Default