Show Port Protocol; Show Port-Channel - Planet WGSW-24000 User Manual

factory default is enabled.
▫ LACP Mode - Displays whether LACP is enabled or disabled on this port.

8.6.47 show port protocol

This command displays the Protocol-Based VLAN information for either the entire system, or for the
indicated Group.
▫
Format show port protocol {<groupid> | all}
▫
Mode Privileged EXEC
▫ Group Name - This field displays the group name of an entry in the Protocol-based VLAN table.
▫ Group ID - This field displays the group identifier of the protocol group.
▫ Protocol(s) - This field indicates the type of protocol(s) for this group.
▫ VLAN - This field indicates the VLAN associated with this Protocol Group.
▫ Interface(s) - This field lists the slot/port interface(s) that are associated with this Protocol Group.

8.6.48 show port-channel

This command displays an overview of all port-channels (LAGs) on the switch.
▫
Format show port-channel {<logical slot/port> | all}
▫
Mode Privileged EXEC
▫ Logical slot/port - The logical slot and the logical port.
▫ Name - The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric
characters.
▫ Link State - Indicates whether the Link is up or down.
▫ Admin Mode - May be enabled or disabled. The factory default is enabled.
▫ Link Trap Mode - This object determines whether or not to send a trap when link status changes.
The factory default is enabled.
▫ STP Mode - The Spanning Tree Protocol Administrative Mode associated with the port or
portchannel (LAG). The possible values are:
▫ Disable - Spanning tree is disabled for this port.
▫ Enable - Spanning tree is enabled for this port.
▫ Mbr Ports - A listing of the ports that are members of this port-channel (LAG), in slot/port notation.
There can be a maximum of eight ports assigned to a given port-channel (LAG).
▫ Port Speed - Speed of the port-channel port.
▫ Type -This field displays the status designating whether a particular port-channel (LAG) is statically
or dynamically maintained. The possible values of this field are Static, indicating that the
port-channel is statically maintained; and Dynamic, indicating that the port-channel is dynamically
maintained.
▫ Active Ports - This field lists the ports that are actively participating in the port-channel (LAG).