Set Power Provision Priority - Planet POE-1200 User Manual

3.10 Set Power Provision Priority

To set the power provision priority to Power Device (PD), enter set priority [n] [m] to
view the single PD power provision priority to port n with priority m, and set priority all
zero to set all PD power provision priority to default value to all ports. For example, if
you want the PD connected in port 15 to have a lowest priority, the command will be set
priority 15 11 . As show in Figure 3-16 and 3-17
POE2400> set priority 15 11
Figure 3-17 Set Priority to a single port screen
POE2400> set priority all zero

Note:
16
Figure 3-16 Show Priority screen
Figure 3-18 Set Priority to all ports screen
The priority level is ranged from 0 to 11, 0 is the highest and
11 is the lowest.