Configuring A Sprecode Key Using The Mitel Web Ui; Park/Pickup Keys - Mitel 6920w User Manual

C S
ONFIGURING OFTKEYS

Configuring a Sprecode Key Using the Mitel Web UI

Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 20 on the Top keys.
2.
or
Select from Key 1 through Key 18 on the Bottom keys.
In the Type field, select Sprecode.
3.
In the Label field, enter a label to display on the IP phone for this key.
4.
In the Value field, enter the appropriate value for accessing specific services from the server.
5.
: For values to enter in this field, contact your System Administrator.
NOTE
In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
6.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
7.
In the Type field, select Sprecode.
8.
In the Value field, enter the appropriate value for accessing specific services from the server.
9.
: For values to enter in this field, contact your System Administrator.
NOTE
Click Save Settings.
10.

Park/Pickup Keys

The 6920 SIP IP phone has a park and pickup call feature that allows you to park a call and pickup a call
when required. The park/pickup feature performs as follows:
When a call comes in and you pickup the handset, you can press the applicable Park key to park the
•
call.
After the call is parked, you can press the Pickup key, followed by the applicable value to pickup the
•
call.
P /P K
ARK ICKUP EYS
92