Transfer Report - Savin 3699 Key Operator Tools

Key Operator Tools
If you make a mistake, press the
{Clear} key and enter the correct
code.
H
Press [PrevMenu] three times.
I
Press [Exit] to return to the stand-
by mode.

Transfer Report

When the optional G4 unit is installed,
register the G4 fax number.
Follow these steps to store the fax
number of the line your machine is
connected to as the return address for
when making transfer requests.
When you make a Transfer Request
from this machine, this number is
passed to the transfer station. The
transfer station then sends back the
Transfer Result Report to this fax
number.
You can store the following settings:
• G3 direct number
• G3 PABX number
• G4 fax number
Limitation
9
If the line in being used (i.e. com-
munication is in progress), you
cannot register or edit these set-
tings. Please wait until the commu-
nication has finished.
Transfer request transmission will
not function unless the return ad-
dress is stored.
A
Make sure that the machine is in
standby mode.
252
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "Transfer Re-
port" with the number keys.
Note
If the Item you require is not
displayed, press [ Prev.] or [ N-
ext] until it is.