When Power Is Turned Off Or Fails - Savin 3699 Communication Information

Troubleshooting

When Power is Turned Off or Fails

Even if the power switch is turned off, the contents of the machine's memory
(programmed numbers etc.) will not be lost. However, if power is lost for more
than 1 hour through the power switch being turned off, a power outage or the
power cable being removed, memory contents will be lost. Lost items will in-
clude any fax messages stored in memory using Memory Transmission or Re-
ception.
If a file has been deleted from memory, a Power Failure Report is automatically
printed as soon has power is restored. This report can be used to identify lost
files. If a document stored for Memory Transmission was lost, re-send it. If a
message received by Memory Reception or Substitute Reception was lost, ask
the sender to re-send it. If an Auto Document was lost, you will need to store it
in memory again.
Important
Make sure that 100% is shown on the display before you unplug the machine.
If a lower value is shown, some data is currently stored in memory.
7
178