Cautions For Proper Use - Panasonic MINAS A5-series Operating Instructions Manual

Cautions for Proper Use

• This product is intended to be used with a general industrial product, but not designed
or manufactured to be used in a machine or system that may cause personal death
when it is failed.
• Installation, wiring, operation, maintenance, etc., of the equipment should be done by
qualified and experienced personnel.
• Apply adequate tightening torque to the product mounting screw by taking into consid-
eration strength of the screw and the characteristics of material to which the product is
installed. Overtightening can damage the screw and/or material; undertightening can
result in loosening.
Example) Steel screw into steel section:
• Install a safety equipments or apparatus in your application, when a serious accident
or loss of property is expected due to the failure of this product.
• Consult us if the application of this product is under such special conditions and en-
vironments as nuclear energy control, aerospace, transportation, medical equipment,
various safety equipments or equipments which require a lesser air contamination.
• We have been making the best effort to ensure the highest quality of the products,
however, application of exceptionally larger external noise disturbance and static elec-
tricity, or failure in input power, wiring and components may result in unexpected ac-
tion. It is highly recommended that you make a fail-safe design and secure the safety
in the operative range.
• If the motor shaft is not electrically grounded, it may cause an electrolytic corrosion to
the bearing, depending on the condition of the machine and its mounting environment,
and may result in the bearing noise. Checking and verification by customer is required.
• Failure of this product depending on its content, may generate smoke of about one cig-
arette. Take this into consideration when the application of the machine is clean room
related.
• Please be careful when using in an environment with high concentrations of sulfur or
sulfric gases, as sulfuration can lead to disconnection from the chip resistor or a poor
contact connection.
• Take care to avoid inputting a supply voltage which significantly exceeds the rated
range to the power supply of this product. Failure to heed this caution may result in
damage to the internal parts, causing smoking and/or a fire and other trouble.
• The user is responsible for matching between machine and components in terms of
configuration, dimensions, life expectancy, characteristics, when installing the machine
or changing specification of the machine. The user is also responsible for complying
with applicable laws and regulations.
Marketeing Group, Motor Company, Panasonic Corporation
Tokyo: Kyobashi MID Bldg, 2-13-10 Kyobashi, Chuo-ku, Tokyo 104-0031
Osaka: 1-1, Morofuku 7-chome, Daito, Osaka 574-0044
M4 1.35 to 1.65 N·m.
M5 2.7 to 3.3 N·m.
M6 4.68 to 5.72 N·m.
M8 11.25 to 13.75 N·m.
M10 22.05 to 26.95 N·m.
M11 37.8 to 46.2 N·m.
TEL (03)3538-2961
FAX (03)3538-2964
TEL (072)870-3065
FAX (072)870-3151
7-97