Outline Of Setup Support Software, "Panaterm; Setup On The Pc - Panasonic MINAS A5-series Operating Instructions Manual

7
Supplement
Connector X1 of MINAS A5 can be connected to your PC through USB cable for computer.
Once you download the setup support software PANATERM from our web site and install it
to your PC, the following tasks can be easily performed.
Outline of PANATERM
With the PANATERM, you can execute the followings.
(1) Setup and storage of parameters, and writing to the memory (EEPROM).
(2) Monitoring of I/O and pulse input and load factor.
(3) Display of the present alarm and reference of the error history.
(4) Data measurement of the wave-form graphic and bringing of the stored data.
(5) Normal auto-gain tuning
(6) Frequency characteristic measurement of the machine system.
Note
Distribution media such as CD-ROM for this software are not prepared.
Download the software from our web site and install it to your PC.
How to Connect
• USB cable
The connection cable should be provided with USB mini-B connector at the driver side
and the PC compatible connector on the other end.
If the cable has no noise filter, install a signal noise filter (DVOP1460) to both ends of
the cable.
System required for PANATERM
To use PANATERM, the following system components are required.
• PC
• Display
7-26
3.Outline of Setup Support Software, "PANATERM"
Setup on the PC
Connect to connector X1.
(USB mini-B)
Download setup support software PANATERM
from our web site and install it to your PC.
OS
CPU
Memory
Hard disk
Serial communication
Resolution
No. of colors
Windows XP SP3 (32-bit Ver.)
®
Windows VISTA SP1 (32-bit Ver.)
®
(Japanese, English or Chinese version)
Note: Windows (x64) (64-bit Ver.) is not supported.
®
Pentium III 512 MHz or better
256 MB or more (512 MB recommended)
512 MB or more free space
USB port
1024 × 768 pixel or more
24-bit color (True Color) or better