Ip Http Secure-Server - Dell Networking 7048 Reference Manual

Default Configuration
This default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
The HTTPS TCP port should not be set to a value that might conflict with
other well known protocol port numbers used on this switch.
Example
The following example configures the HTTPS port number to 100.
console(config)#ip http secure–port 2

ip http secure-server

Use the ip http secure-server command in Global Configuration mode to
enable the switch to be configured, monitored, or modified securely from a
browser. To disable this function, use the no form of this command.
Syntax
ip http secure-server
no ip http secure-server
Default Configuration
The default for the switch is disabled.
Command Mode
Global Configuration mode
User Guidelines
You must import a certificate using the crypto certificate import command,
followed by the crypto certificate generate command.
1745
Web Server Commands