Ip Http Port - Dell Networking 7048 Reference Manual

User Guidelines
This command mode is entered using the crypto certificate generate
command.
Example
The following example displays how specify a duration of 50 days that a
certification is valid.
console(config-crypto-cert)#duration 50

ip http port

Use the ip http port command in Global Configuration mode to specify the
TCP port for use by a web browser to configure the switch. To use the default
TCP port, use the no form of this command.
Syntax
port-number
ip http port
no ip http port
port-number — Port number for use by the HTTP server. (Range:
•
1–65535)
Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
The HTTP TCP port should not be set to a value that might conflict with
other well-known protocol port numbers used on this switch.
Example
The following example shows how the http port number is configured to 100.
console(config)#ip http port 100
1742
Web Server Commands