Applying The Insert Effect To A Track - Zoom MRS-1608 Operation Manual

Quick Tour
4.4 Applying the insert effect to a
track
You can apply the insert effect to the output of any track, so
that it post-processes the output signal of the track.
◆ Changing the algorithm/insert position of
the insert effect
1.
Use the [ALGORITHM] key in the effect
section to select the algorithm you want to
use.
When applying the insert effect to a track, the selected
algorithm determines the number of tracks for which the
effect can be used.
● When 8x COMP EQ is selected
The effect can be used on the output of eight continuous
tracks (1 – 8 or 9 – 16).
● When an algorithm other than 8x COMP EQ is
selected
The effect can be used on a maximum of two mono tracks or
one stereo track.
2.
Press the [INPUT SOURCE] key in the effect
section.
The currently selected insert position appears on the display.
3.
Turn the dial to bring up the track to which
you want to apply the insert effect on the
second line of the display.
The status key of the selected track lights up in orange.
● When 8x COMP EQ algorithm is selected
You can select eight continuous tracks (TR 1 – 8 or TR 9 –
16) as insert location. Also if you have selected track TR 9 –
16, you can set different high-pass filter, compressor, and EQ
values for odd/even-numbered tracks.
IN SRC IN SRC
TR1-8 TR1-8
32
● When an algorithm other than 8x COMP EQ is
You can select one of eight mono tracks (TR 1 – TR 8) or two
mono tracks/one stereo track (TR 1/2 – TR 15/16) as insert
location.
HINT
The insert position can also be selected with the status keys. To
select a mono track x 2, hold down one status key while
pressing the other one.
◆ Selecting the patch for the insert effect
4.
The currently selected patch is shown on the display.
5.
The insert effect can now be used to post-process the
specified track. When the effect is applied, the track output
level may change. Use the respective fader to readjust the
level as necessary.
HINT
When the 8x COMP EQ algorithm is selected, settings and effect
on/off switching can be done individually for each track
IN SRC IN SRC
(→ p.142).
IN IN
6.
HINT
If the insert effect is applied to the track output, it is not possible
to also apply it to the input or before the [MASTER] fader.
However, by using the bounce function (
track/V-take on another empty V-take, you can turn the post-
processed effect sound into audio data and then apply the insert
effect at another position.
selected
IN SRC IN SRC
TR1 TR1
Press the [ALGORITHM] key selected in step
1 once more.
While playing the song, turn the dial to select
the patch to use.
When you have checked the effect, stop the
song and press the [EXIT] key to return to the
main screen.
→
p. 42) to record the
ZOOaM MRS-1608