Recalling A Scene; Switching Scenes Automatically - Zoom MRS-1608 Operation Manual

4.
Use the cursor left/right keys to move the
flashing section, and turn the dial to select
a character.
Repeat this until the name is as desired. For information
on available characters, refer to page 36.
5.
To carry out the store process, press the
[STORE] key or the [ENTER] key.
The current mixer and effect settings will be saved as a
scene. When the process is completed, the unit returns to
the screen of step 2. To cancel the process, you can press
the [EXIT] key instead of these keys to return to the
previous screen.
6.
Press the [EXIT] key to return to the main
screen.

Recalling a scene

This section explains how to recall a scene that was saved
to memory.
1.
Press the [SCENE] key in the control
section.
The display indicates the scene number that will be
recalled.
2.
Turn the dial to select the desired scene to
recall.
HINT
By pressing the [EDIT] key after selecting a scene, you can
edit the name of the scene. Refer to steps 4 – 5 of "Saving a
scene" to edit the name.
3.
To recall the selected scene, press the
[ENTER] key.
The scene is recalled, the indication "CALL" appears on
the display, and the unit returns to the condition of step 1.
If you press the [EXIT] key instead of the [ENTER] key,
the action is canceled and the main screen returns.
ZOOM MRS-1608

Switching scenes automatically

The MRS-1608 allows you to assign a scene to a mark
( → p. 46) that was placed at a desired location in the
song. This can be used to switch scenes automatically.
For example, you could change the mixing balance or
effect settings as the song progresses.
1.
Move to the point in the song where you
want to change the mix, and press the
[MARK] key in the control section.
A mark is entered at this point. Repeat this step to enter
marks at all other points where you want to change the
mix.
2.
Save the mix setting to be used at the start
of the song as well as all other mix settings
to be used in the middle of the song as
scenes.
3.
While the recorder is stopped, press the
U
ZERO [ ] key in the transport section to
move to the recorder start position.
The beginning of the song (counter zero location) already
contains the mark number 00. You can assign the starting
scene to this mark.
4.
Press the [MARK] key.
When you press the [MARK] key at a location where a
mark symbol is shown, a screen will appear in which you
can assign a scene to the corresponding mark.
MARK ED MARK ED
SCENE SCENE
0 0 0 5 5 50 50 80 80 3 3 24 24 00 00
NOTE
If you press the [MARK] key at a location where no mark
symbol is shown, a new mark will be assigned to that
location.
5.
Turn the dial to select the number of the
scene you want to assign to this mark, and
press the [ENTER] key.
The scene will be assigned to the mark.
Reference [Mixer]
-- --
85