Setting The Insert Effect Position - Zoom R24 Operation Manual

Effects

Setting the insert effect position

You can set the insert effect position.
This menu item only appears for the insert effect.
1
Press
Press
select an insert effect.
2
Select ON/OFF and set it to ON.
3
Select an algorithm and patch.
NOTE
• You can select a single INPUT (1~8) only if you
have chosen the CLEAN, DISTORTION, ACO/
BASS SIM, BASS or MIC algorithm.
• You can select Track1-8, Track9-16 or
Track17-24 only if you have chosen the
8xCOMP EQ algorithm.
• You can select INPUT 1-8 only when the
8xCOMP EQ algorithm has been chosen.
• After setting the insertion point, if you change the
algorithm to 8xCOMP EQ, the insertion point will
be changed to Input1-8, Track1-8, Track9-
16, Track17-24 (depending on the previously
selected setting).
• To insert on a single mono track output, select
TRACK1 ~ TRACK24. To insert on two mono
tracks or a stereo track, select TRACK1/2 ~
TRACK 23/24. To insert before the MASTER fader,
select MASTER.
81
Select effect type
beneath to
Change menu
Change
setting
Change menu
Change
setting
4
Select INPUT SRC.
5
Select the input source.
Display
Input1~Input8
Track1~Track24
Track1/2~
Track23/24
Master
8xCOMP EQ insertion points
Input1-8
Track1-8
Track9-16
Track17-24
HINT
Changing the insertion point of the effect
By default, the insert effect is inserted on INPUT 1
in a project. To change this, set the INPUT SRC
at Step 4.
Change menu
Select input
source
Insertion point
One input
Output of one mono track
Output of a stereo track or two
mono tracks
Before MASTER fader
All track 1–8 inputs
All track 1–8 outputs
All track 9–16 outputs
All track 17–24 outputs