Adjusting The Sensitivity Of The Pads; Checking The Remaining Amount Of Memory; Swapping The Left/Right Pan Position - Zoom MRS-1608 Operation Manual

Reference [Rhythm]
Adjusting the sensitivity of the
pads
You can specify the volume that is produced according to
the force with which you hit the pads (pad sensitivity).
Perform steps 1 – 3 of "Basic procedure" to bring up the
indication "UTILITY PAD SENS", and press the
[ENTER] key. Then turn the dial to choose one of these
settings.
PAD SENS PAD SENS
NORMAL NORMAL
●
SOFT
The volume will be soft, regardless of how strongly you
tap the pad.
●
MEDIUM
The volume will be medium, regardless of how strongly
you tap the pad.
●
LOUD
The volume will be loud, regardless of how strongly you
tap the pad.
●
LITE
Maximum sensitivity. Even light taps will produce a loud
volume.
●
NORMAL
Normal sensitivity (default setting).
●
HARD
Low sensitivity. Strong tapping is needed to produce a
loud volume.
●
EX HARD
Lowest sensitivity. Very strong tapping is needed to
produce a loud volume.
120
Checking the remaining amount of
memory
The remaining amount of recording memory for rhythm
patterns and rhythm songs will be displayed as a
percentage (%). Perform steps 1 – 3 of "Basic procedure"
to bring up the indication "UTILITY MEMORY", and
press the [ENTER] key. This screen is for display only.
There is no setting that can be edited.
MEMORY MEMORY
45% 45%
Swapping the left/right pan
position
The pan setting for the drum sound can be set to apply as
seen from the drummer or from the listener. Perform
steps 1 - 3 of "Basic procedure" to bring up the indication
"UTILITY POSITION", and press the [ENTER] key.
Then select one of the following settings.
●
PLAYER
Left/right pan setting applies as seen from the player
(drummer).
●
LISTENER
Left/right pan setting applies as seen from the listener
(audience).
ZOOM MRS-1608