Table of Contents
Advertisement
Reference [Rhythm]
If a key is not lit, press it so that it lights up. Use the
U
ZERO [
] key to align the current position with the
beginning of the rhythm song.
2.
O
Press the REC [
The [REC] key lights up and rhythm pattern input for the
rhythm song becomes possible.
3.
Press the cursor up key repeatedly to bring
up the indication "EV
the display.
This screen lets you check which event information is
entered at the current point. The symbol after "EV
(such as "Pt" or "TS") denotes the type of event.
EV EVå
Entered event type
Available events and their symbols are listed in the table
below.
Type of
Content
Symbol
event
Rhythm pattern
Ptn
number
Time signature
TimSig
Chord root
ROOT
Chord type
CHORD
Tempo
Tempo
Drum sequence
DrVOL
volume
Bass sequence
BsVOL
volume
DrKIT
Drum kit
BsPRG
Bass program
NOTE
• If no tempo information is input for the rhythm song, the
tempo currently set for the rhythm section will be used. To
ensure that a rhythm song will always play with the same
tempo, be sure to enter tempo information at the beginning of
the song.
• Time signature information can be entered only at the
beginning of a measure.
4.
Move to the location at which you want to
input a new event.
110
] key.
" on the first line of
→
Range
000 – 510
1 – 8(1/4 – 8/4)
C – B
--, Maj, m, 7, m7, M7,
aug, dim, 7sus4, sus4,
m7b5, m6, 6, m9, M9,
mM7
40.0 – 250.0
0 – 15
0 – 15
See appendix
See appendix
For details on how to move the current location, refer to
page 108.
5.
Use the cursor up/down keys to select the
type of event that you want to input.
If the event you select here has been input at the current
location, its value will be displayed.
"
→
If there is no corresponding event, the display will
indicate "
indicates that the previously input event information is
still valid.
6.
Turn the dial to input the event value.
7.
Input the remaining events in the same way.
To input more information for the same type of event, you
can move the current position in measures or beats while
the event input screen is displayed.
If you make a mistake or want to change the information,
the events can be edited in the following ways.
●
To change an event setting
Display the event you want to change, and turn the dial to
alter the setting.
●
To delete event information
Display the event you want to delete, and press the
[DELETE/ERASE] key.
8.
When you have finished, press the STOP
P
[
] key.
O
The REC [
selection screen appears again. To return to the main
screen, press the [EXIT] key several times.
DrVOL
DrVOL
15 15
xxx" (where xxx is the event name). This
TEMPO
TEMPO
] key goes out, and the rhythm song
ZOOM MRS-1608
Advertisement
Table of Contents
