This section describes how to perform operations for entire projects.
About projects
On the MRS-1608, the data needed to reproduce a song
you create are managed in units called "projects". By
loading a project from the hard disk, you can always go
back to exactly the same condition that existed when the
project was saved. A project contains the following
information.
• Audio data recorded on V-takes 1 – 10 of tracks 1 – 16
and the master track
• Numbers of selected V-takes for each track
• Mixer section settings
• Settings saved in scene numbers 0 – 99
• Scene parameter enabled/disabled settings
• Numbers and settings of patches currently selected
for insert effect/send return effects
• Rhythm patterns
• Rhythm songs
• Numbers of drum kit/bass program currently selected
for drum/bass track
• Sampler programs for pad sampler
• Samples used by sampler programs
• Audio data in phrase pool
• Playlist contents
• Other required files
NOTE
On the MRS-1608, recording/playback operations can be
performed only for the currently loaded project. It is not
possible to perform functions for multiple projects
simultaneously.
ZOOM MRS-1608
Reference [Projects]
Project operations
This section explains operations such as loading or
saving a project. The procedure is the same for most
project operations. The basic procedure is as follows.
Basic procedure
1.
From the main screen, press the
[PROJECT] key.
The project menu appears on the display, allowing you to
select the desired project operation.
PROJECT
PROJECT
SELECT
SELECT
HINT
When you press the [PROJECT] key, the current project is
automatically saved on the hard disk.
2.
Use the cursor left/right keys to select one
of the following operations.
●
PROJECT SELECT
Load a previously saved project from the internal hard
disk.
●
PROJECT NEW
Create a new project.
●
PROJECT SIZE
View the size of the currently loaded project.
●
PROJECT COPY
Duplicate a specified project on the hard disk.
●
PROJECT ERASE
Erase a specified project from the hard disk.
●
PROJECT NAME
Edit the name of the currently loaded project.
●
PROJECT PROTECT
Switch the protection status of the currently loaded
project on or off.
165