Table of Contents
Advertisement
◆ Track parameter list
Parameter
Display
EQ HI G
EQ HI GAIN (*)
EQ HI
EQ HI F
FREQUENCY (*)
EQ MID G
EQ MID GAIN (*)
EQ MID
EQ MID F
FREQUENCY (*)
EQ MID
EQ MID Q
Q-FACTOR (*)
EQ LO G
EQ LOW GAIN (*)
EQ LOW
EQ LO F
FREQUENCY (*)
CHORUS/
CHO SEND
DELAY SEND
LEVEL (*)
REVERB SEND
REV SEND
LEVEL (*)
SUB-OUT SEND
SUB SEND
ON/OFF (*)
SUB-OUT SEND
SUB SEND LVL
LEVEL (*)
SUB-OUT SEND
SUB SEND Pan
PAN (*)
PAN
PAN (*)
TR
x-y
V-TAKE
FADER
FADER
REC LVL
REC LVL
ST LINK
STEREO LINK
INVERT
INVERT
(*) symbol: denotes a parameter that can be switched on and off directly with a key in the track parameter section.
O: Valid parameter for this track/input
∆: The triangle denotes a parameter that is only displayed when the SUB-OUT SEND LVL ON/OFF parameter for the master track is off.
ZOOM MRS-1608
Setting range Description
Adjusts high-frequency boost or
cut in the range from -12 to +12
-12 – +12dB
dB. This parameter is only shown
when HI EQ is on.
Adjusts turnover frequency for
500 –
high-frequency boost/cut. This
parameter is only shown when HI
18000(Hz)
EQ is on.
Adjusts mid-frequency boost or
cut in the range from -12 to +12
-12 – +12dB
dB. This parameter is only shown
when MID EQ is on.
Adjusts turnover frequency for
mid-frequency boost/cut. This
40 – 18000(Hz)
parameter is only shown when
MID EQ is on.
Adjusts the Q value (bandwidth)
for mid-frequency EQ. This
0.1 – 1.0
parameter is only shown when
MID EQ is on.
Adjusts low-frequency boost or
cut in the range from -12 to +12
-12 – +12dB
dB. This parameter is only shown
when LOW EQ is on.
Adjusts turnover frequency for
low-frequency boost/cut. This
40 – 1600(Hz)
parameter is only shown when
LOW EQ is on.
Adjusts the chorus/delay effect
0 – 100
send level for the track/input.
Adjusts the reverb effect send level
0 – 100
for the track/input.
Selects whether the signal at the
MASTER OUTPUT jacks (master
ON/OFF
track signal) is also supplied to the
STEREO SUB-OUT jack.
Adjusts the level of the signal sent
from the track/input to the
0 – 127
STEREO SUB-OUT jack
(→ p. 82).
Adjusts panning for the signal sent
L100 – 0 –
from the track/input to the
R100
STEREO SUB-OUT jack
Adjusts the panning value of the
L100 – 0 –
track/input signal. For stereo
tracks, the parameter adjusts the
R100
left/right level balance.
Selects the V-take to use for the
x=1 – 16
track (→ p. 35). x stands for the
track number and y for the V-take
y=1 – 10
number.
0 – 127
Adjusts the current volume level.
0 – 127
Adjusts the recording level.
Controls the stereo link function
ON/OFF
for linking two mono tracks
(→ p. 82).
Allows inverting the track/input
phase. When set to off, the phase is
ON/OFF
normal. When set to on, the phase
is inverted.
Reference [Mixer]
Track
Track
Master
Drum/
1 – 8
9 – 16
track
bass track
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
∆
∆
∆
∆
∆
∆
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Input
1 – 8
O
O
∆
∆
O
O
O
81
Advertisement
Table of Contents
