Zoom MRS-1608 Operation Manual page 72

Reference [Phrase Looping]
imported, the indication "EMPTY" appears instead of the
phrase name.
4.
Press the [EDIT] key.
A parameter of the selected phrase appears.
PHRASE PHRASE
MEAS x02 No.1 MEAS x02
5.
Use the cursor up/down keys to call up the
parameter you want to edit.
●
MEAS xXX (XX = 01 – 99)
This parameter specifies to how many measures the
playback range of the phrase corresponds. The parameter
lets you compress or expand the playing duration of the
phrase to match the tempo setting of the rhythm section.
The setting range is 1 – 99 measures.
●
TIMSIG
This specifies the time signature of the phrase. In
combination with the MEAS x parameter, it determines
the length of the phrase. The setting range is 1 (1/4) – 8
(8/4).
●
START
Specifies the playback start point of the phrase in
milliseconds. In the default condition, this is the
beginning of the imported data.
●
END
Specifies the playback end point of the phrase in
milliseconds. In the default condition, this is the end of
the imported data.
●
NAME
Specifies a name for the phrase.
●
LVL
Specifies the phrase playback level in the range of ±24
dB.
HINT
If you do not intend to match the phrase to a rhythm song,
there is no need to set the MEAS x and TIMSIG parameters.
72
No.1
6.
Use the dial and the cursor left/right keys to
adjust the setting value.
• Adjusting MEAS x/TIMSIG/LVL
Turn the dial to set the numerical value.
• Adjusting START / END
Use the cursor left/right keys to cause the counter value
to flash, and turn the dial to set the value.
• Adjusting NAME
Use the cursor left/right keys to move the flashing section
to the character to edit, and turn the dial to select the
character.
HINT
R
You can use the PLAY [ ] key to check the phrase during
editing.
7.
Repeat steps 5 – 6 to complete the phrase.
If desired, press the [EXIT] key several times to return to
the phrase screen, and edit another phrase.
8.
To return to the main screen, press the
[EXIT] key several times.
ZOOM MRS-1608