Zoom MRS-1608 Operation Manual page 143

type, the effect parameter arrangement also changes.)
Effect
MODULATION/
module
DELAY
Effect
CHORUS
type
DEPTH
Effect
RATE
parameters
MIX
This section explains how to edit the effect type and effect
parameters for the currently selected patch.
1.
Use the [ALGORITHM] keys to select the
algorithm, and then use the PATCH SELECT
[W]/[Q] keys or the dial to select the patch to
edit.
It is not possible to later change the algorithm of a patch. For
this reason, you must first begin by selecting a patch that
uses the desired algorithm, even to create a patch from the
beginning.
HINT
The indication "EMPTY" appears instead of the patch name if
the patch is empty. By editing such a patch, you can create a
patch from the beginning.
2.
Press the [EDIT] key.
The first line of the display will indicate the effect module
type, followed by "EDIT". This means that the patch can
now be edited.
Algorithm
CLEAN
COMPRESS COMPRESS
DIST
ACO/BASS sim
COMP
BASS
COMP/LIM COMP/LIM
MIC
COMP/LIM
COMP L COMP L
DUAL MIC
COMP/LIM
HPF1 HPF1
8x COMP EQ
COMP/LIM COMP/LIM
LINE
COMP/LIM
CMP/LoFi CMP/LoFi
MASTERING
3BAND COMP/LO-FI
ZOOM MRS-1608
FLANGER PHASER
DEPTH POSITION
RATE RATE
FB COLOR
Module indication
PRE/DRV PRE/DRV
PRE AMP/DRIVE
MIC PRE MIC PRE
MICPRE+DE-ESSER
MicPre L MicPre L
MICPRE
HPF2 HPF2
ISOLATOR ISOLATOR
ISOLATOR
NORMLZR NORMLZR
NORMALIZER
Effect module type
COMPRESS COMPRESS
SENS SENS
3.
Use the cursor left/right keys to select the
effect module to edit.
MOD/DLY MOD/DLY
CHORUS CHORUS
The indication shown on the first line for the various effect
modules is as follows.
HINT
• To edit the ZNR/VOL PDL module, bring up the indication
"TOTAL" on the first line of the display.
• In the DUAL MIC algorithm, the modules assigned to the L
and R channels can be edited separately. The indication "L"
on the first line of the display means that the module for the
left channel is selected. The indication "R" means that the
module for the right channel is selected.
• The 8x COMP EQ algorithm has one high-pass filter,
compressor, and EQ per channel, with individual on/off
control. The number of the channel currently selected for
operation is shown on the first line of the display.
3BandEQ 3BandEQ MOD/DLY MOD/DLY
EQ MODULATION/DELAY
3BandEQ 3BandEQ MOD/DLY MOD/DLY
EQ MODULATION/DELAY
EQ L EQ L DELAY L DELAY L
EQ DELAY
HPF8 HPF8
3BandEQ 3BandEQ MOD/DLY MOD/DLY
EQ MODULATION/DELAY
3BandEQ 3BandEQ DIM/RESO DIM/RESO
EQ DIMENSION/
RESONANCE
Reference [Effects]
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
TOTAL TOTAL
ZNR, VOL PDL, PAT LVL
143