Creating An Audio Cd; Creating An Audio Cd By Project - Zoom MRS-1608 Operation Manual

Reference [Creating a CD]

Creating an audio CD

This section describes how to create an audio CD using a
completed project as source material.

Creating an audio CD by project

You can write the contents of the master track of the
current project to a CD-R/RW disc. When creating an
audio CD by project, you can select any desired V-take of
the master track as source.
1.
Insert a CD-R/RW disc into the integrated
CD-R/RW drive.
To newly write audio data, use a blank CD-R/RW disc or
a CD-RW disc that has been completely erased.
Even when audio data are present, adding data is possible
as long as the disc has not been finalized.
2.
Select the project to be used as write
source.
NOTE
Before starting the procedure, use the trimming function on
the V-take to make sure that it does not include unwanted
blank portions at the beginning and end (
3.
From the main screen, press the [CD-R/
RW] key in the control section.
The CD-R/RW menu for various disc related functions
appears.
CD-R/RW CD-R/RW
AUDIO CD AUDIO CD
4.
Verify that "CD-R/RW AUDIO CD" is shown
on the display and press the [ENTER] key.
The display indication changes as follows.
AUDIO CD AUDIO CD
BURN CD BURN CD
152
→
p. 52).
5.
Verify that the indication "AUDIO CD BURN
CD" is shown on the display, and press the
[ENTER] key.
The indication "BURN CD TIME" is shown, along with
the duration of the master track (V-take) that is currently
selected for writing.
By pressing the PLAY [
listen to the contents of the V-take.
BURN CD BURN CD
TIME TIME
0 3 327 27320 320
Master track duration
HINT
When you press the cursor down key, the second line of the
display shows "REMAIN", and the remaining write time on
the inserted CD-R/RW disc appears on the counter. Press
the cursor up key to return to the previous indication.
6.
To change the V-take to be used as source
material, press the [EDIT] key.
When the key is pressed, the display indication changes
as follows.
TAKE SEL TAKE SEL
MASTER 1 MASTER 1 TR M- 1
NOTE
Unrecorded V-takes of the master track cannot be selected.
By turning the dial in this condition, you can select the V-
take. To return to the condition of step 5, press the [EXIT]
key. If necessary, listen to the V-take to verify that the
correct V-take is selected.
7.
Press the [ENTER] key twice.
When you press the key once, the indication "CD Trkxx
WRITE?" appears, and when you press the key the
second time, the indication changes to "CD Trkxx
SURE?" (where xx is the track number). When adding to
a CD-R/RW disc, this indication lets you check which
track of the project will be written.
R
] key at this point, you can
TR M- 1
ZOOM MRS-1608