Deleting A Sample; Editing A Specified Range Of A Sample - Zoom MRS-1608 Operation Manual

HINT
The copy process will overwrite the existing sample at the
destination number. Take care not to accidentally overwrite a
sample that you want to keep.
7.
To execute the copy process, press the
[ENTER] key.
When the copy operation is completed, the unit returns to
the sample selection screen.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.

Deleting a sample

You can delete a sample from the sample pool as follows.
NOTE
Once deleted, a sample cannot be restored. Use this
function with care.
1.
From the main screen, press the [RHYTHM]
key in the display section.
The key lights up, and the rhythm section can be used
independently.
2.
Press the [UTILITY/TRACK EDIT] key in the
display section.
The rhythm utility menu appears.
3.
Use the cursor left/right keys to bring up
the indication "UTILITY SAMPLE" on the
display, and press the [ENTER] key.
A screen for selecting the sample appears on the display.
SAMPLE SAMPLE
SAMPL000 SAMPL000 No.0
Sample name
4.
Turn the dial to select the sample you want
to delete.
5.
Press the [DELETE/ERASE] key in the
rhythm section.
The indication "DELETE SURE?" appears on the
display.
ZOOM MRS-1608
No.0
Sample number
6.
To execute the delete process, press the
[ENTER] key.
When the delete operation is completed, the unit returns
to the sample selection screen.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Editing a specified range of a
sample
You can specify a range of a sample and then perform
waveform editing functions such as reversing, fade-in/
out.
1.
From the main screen, press the [RHYTHM]
key in the display section.
The key lights up, and the rhythm section can be used
independently.
2.
Press the [UTILITY/TRACK EDIT] key in the
display section.
The rhythm utility menu appears.
3.
Use the cursor left/right keys to bring up
the indication "UTILITY SAMPLE" on the
display, and press the [ENTER] key.
A screen for selecting the sample appears on the display.
4.
Turn the dial to select the sample you want
to edit, and then press the [UTILITY/TRACK
EDIT] key once more.
The sample utility menu appears.
5.
Use the cursor left/right keys to bring up
the indication "SAMPLE SPL EDIT" on the
display, and press the [ENTER] key.
In this condition, you can select an editing command.
SPL EDIT SPL EDIT
REVERSE REVERSE
The following commands are available.
●
REVERSE
Reverse a specified range of audio data.
Reference [Pad Sampler]
127