Editing A Sample; Copying A Sample - Zoom MRS-1608 Operation Manual

Multitrack recording studio
Table of Contents

Advertisement

Reference [Pad Sampler]
END
Specifies the playback end point of the sample in
milliseconds. In the default condition, this is the end of
the sample (max. 22 seconds).
NAME
Specifies the name of the sample.
SIZE
Indicates the size of the currently displayed sample.
7.
Use the dial and the cursor keys to adjust
the setting.
• Setting START/END
Use the cursor left/right keys to move the flashing section
on the display, and turn the dial to adjust the value.
• Setting NAME
Use the cursor left/right keys to move the flashing section
to the character you want to change, and turn the dial to
select the new character.
HINT
• If you press the PLAY [R] key while setting a parameter, the
sample is played.
• The SIZE parameter is for information only and cannot be
changed. If you press the cursor left/right keys, you can select
the unit between KB (kilobytes) and ms (milliseconds).
8.
Repeat steps 6 – 7 to adjust all desired
parameters.
You can also press the [EXIT] key to return to the sample
selection screen, and then select another sample for
parameter adjustment.
9.
To return to the main screen, press the
[EXIT] key several times.
126

Editing a sample

This section describes how you can copy and delete
samples in the sample pool, and how you can perform
waveform data editing on a specified range of a sample.

Copying a sample

You can copy a sample into any other sample number. If
a sample exists at the copy destination number, it will be
overwritten. This is useful to create identical samples
with different start and end points.
1.
From the main screen, press the [RHYTHM]
key in the display section.
The key lights up, and the rhythm section can be used
independently.
2.
Press the [UTILITY/TRACK EDIT] key in the
display section.
The rhythm utility menu appears.
3.
Use the cursor left/right keys to bring up
the indication "UTILITY SAMPLE" on the
display, and press the [ENTER] key.
A screen for selecting the sample appears on the display.
SAMPLE
SAMPLE
SAMPL000
SAMPL000 No.0
Sample name
4.
Turn the dial to select the sample you want
to copy.
5.
Press the [INSERT/COPY] key in the rhythm
section.
The copy destination sample number display appears.
COPY TO
COPY TO
EMPTY
EMPTY
6.
Turn the dial to select the copy destination
sample number, and press the [ENTER] key.
The indication "COPY SURE?" appears on the display.
No.0
Sample number
No.3
No.3
ZOOM MRS-1608

Advertisement

Table of Contents
loading

Table of Contents