Zoom MRS-1608 Operation Manual page 18

Installing the CD-R/RW Drive
4.
Plug the power cable and flat cable
from the main unit into the respective
connectors on the CD-R/RW drive.
18
Rear Panel
Front Panel
Power cable
5.
Push the CD-R/RW drive all the way into the bay,
so that the screw holes on the bottom of the
MRS-1608 and the screw holes of the CD-R/RW
drive are aligned.
6.
Fasten the CD-R/RW drive with the four supplied
panhead screws. Then reattach the bottom plate
with the screws removed in step 2.
NOTE
• Use only the dedicated CD-R/RW drive CD-01 or CD-02 made by
ZOOM Corporation.
• ZOOM Corporation will not accept any responsibility for damage or
third-party claims arising from using any other drive.
Flat cable
ZOOM MRS-1608