Changing The Length Of The Pre-Count; Changing The Metronome Volume - Zoom MRS-1608 Operation Manual

during real-time input of a rhythm pattern.
• PAD SENS
Change the pad sensitivity which determines the volume
level in relation to the force with which the pad is struck.
• MIDI
Make MIDI-related settings (
• IMPORT
Import rhythm patterns and rhythm songs from another
project saved on the hard disk (
• MEMORY
Check the remaining amount of rhythm pattern and
rhythm song memory.
• SAMPLE
Import and edit source material to be used for the pad
sampler function ( → p. 121).
• POSITION
Selects whether the drum sound pan setting applies as
seen from the drummer or from the listener.
4.
Turn the dial to edit the setting.
The screen display and operation will be different for
each item. For details, refer to the sections that follow.
HINT
For information on drum sound set selection, MIDI setting,
importing, and the pad sampler function, refer to the
respective sections.
5.
When the setting procedure is complete,
press the [EXIT] key several times to return
to the main screen.
ZOOM MRS-1608
→ p. 170).
→ p. 117).
Changing the length of the pre-
count
You can change the length of the pre-count that is heard
when you record a rhythm pattern in real time. Perform
steps 1 – 3 of "Basic procedure" to bring up the indication
"UTILITY COUNT", and press the [ENTER] key. Then
turn the dial to choose one of these settings.
COUNT COUNT
4
• OFF
The pre-count is turned off.
• 1 – 8
A pre-count of 1 – 8 beats is heard (default: 4).
• SPECIAL
The following special pre-count is heard.

Changing the metronome volume

You can change the volume of the metronome that is
heard when you record a rhythm pattern in real time.
Perform steps 1 – 3 of "Basic procedure" to bring up the
indication "UTILITY ClickVol", and press the [ENTER]
key. Then turn the dial to set the volume (0 – 15).
ClickVol ClickVol
10 10
Reference [Rhythm]
119