Creating An Audio Cd By Album - Zoom MRS-1608 Operation Manual

CD Trk01 CD Trk01
SURE? SURE?
0 3 327 27320 320
8.
To carry out the write process, press the
[ENTER] key once more.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
During the write process, the indication "wait..." is shown
on the display. The counter indicates the progress status
of the write process. When writing is complete, the
display shows "CD Trkxx COMPLETE" (where xx is the
track number).
9.
To return to the main screen, press the
[EXIT] key several times.
By repeating steps 2 – 8, you can add audio data to the
disc.
HINT
• When adding tracks, a blank of 2 seconds will automatically
be inserted between tracks on the disc.
• As long as the finalizing operation has not been performed,
the CD-R/RW disc cannot be played on an ordinary CD player.
(For information on how to play an unfinalized CD-R/RW disc
on the MRS-1608, refer to page 157.)

Creating an audio CD by album

This method involves creating a list for the audio CD
(called an "album") which combines multiple projects
saved on the hard disk. The CD-R/RW disc is then written
in a single operation. With this method, the disc will be
automatically finalized.
When recording by album, the V-take last selected for the
master track of each project will be selected as source
material.
There are two methods for recording by album:
● Track-at-once (TAO)
The master track of each project selected for the album is
written in a separate operation. When a CD-R written
with track-at-once is played on a CD player, a pause of 2
seconds will occur between tracks.
ZOOM MRS-1608
● Disc-at-once (DAO)
The master tracks of all projects selected for the album
are written in a single operation. When a CD-R written
with disc-at-once is played on a CD player, there will be
no pause between tracks. If necessary, you can use marks
set in the project as PQ subcode information (specifying
track start/stop position and other items) to split up a
single project into multiple tracks.
HINT
You can include playlist information created with the
sequence play function in the album (
NOTE
Before starting the procedure, use the trimming function on
the V-takes to be used as source material.
1.
Insert a CD-R/RW disc into the integrated
CD-R/RW drive.
Use a blank CD-R/RW disc or a CD-RW disc that has
been completely erased.
2.
Verify that the V-takes you want to use for
the audio CD are selected for the master
tracks of the projects.
3.
From the main screen, press the [CD-R/
RW] key in the control section.
The CD-R/RW menu appears.
4.
Verify that "CD-R/RW AUDIO CD" is shown
on the display and press the [ENTER] key.
The display indication changes as follows.
AUDIO CD AUDIO CD
BURN CD BURN CD
5.
Use the cursor left/right keys to bring up
the indication "AUDIO CD ALBUM" on the
display, and press the [ENTER] key.
In this condition, you can select the write method.
ALBUM ALBUM
BurnType DAO BurnType
Reference [Creating a CD]
→
p. 156).
DAO
153