Moving A V-Take; Exchanging V-Takes - Zoom MRS-1608 Operation Manual

COPY TO COPY TO
TR 4- 1 TR 4- 1
2.
Use the cursor left/right keys and the dial to
select the destination track/V-take, and
press the [ENTER] key.
The indication "COPY SURE?" appears on the display. If
audio data exist at the copy destination, the indication
"OverWrt?" is shown. When the copy operation is
performed, these data will be overwritten.
3.
To execute the copy operation, press the
[ENTER] key once more.
When the copy operation is completed, the unit returns to
the V-take selection menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.

Moving a V-take

You can move the audio data of a specified V-take to any
other V-take. This action will overwrite any existing data
on the destination V-take. The data on the move source V-
take will be erased.
Move source track
Move
Move destination track
1.
Refer to steps 1 – 5 of "Basic steps for V-
take editing" to select the track/V-take to
move and to bring up the indication
"MOVE" on the display. Then press the
[ENTER] key.
A screen for selecting the move destination track/V-take
appears on the display.
MOVE TO MOVE TO
TR 1- 1 TR 1- 1
2.
Use the cursor left/right keys and the dial to
ZOOM MRS-1608
select the destination track/V-take, and
press the [ENTER] key.
The indication "MOVE SURE?" appears on the display.
If audio data exist at the move destination, the indication
"OverWrt?" is shown. When the move operation is
performed, these data will be overwritten.
3.
To execute the move operation, press the
[ENTER] key once more.
When the move operation is completed, the unit returns
to the V-take selection menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.

Exchanging V-takes

You can exchange the audio data of two specified V-takes.
Exchange
1.
Refer to steps 1 – 5 of "Basic steps for V-
take editing" to select the exchange source
track/V-take. Bring up the indication
"EXCHG" on the display and press the
[ENTER] key.
The exchange destination track/V-take is shown on the
display.
EXCHG TO EXCHG TO
TR 1- 1 TR 1- 1
2.
Use the cursor left/right keys and the dial to
select the exchange destination V-take,
and press the [ENTER] key.
The indication "EXCHG SURE?" appears on the display.
3.
To carry out the exchange operation, press
the [ENTER] key once more.
When the exchange operation is completed, the unit
returns to the V-take selection menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Reference [Track Editing]
63