Zoom MRS-1608 Operation Manual page 193

STEP
Changes the sound with step-like filter characteristics.
RING MOD
Produces a metallic sound.
CRY
Talking-modulator-like effect.
EXCITER
Gives the sound more focus and spatial definition.
AIR
Simulates the air ambience of the room, giving the sound spatial depth.
WIDE
Simulates a stereo recording with two microphones.
DELAY
Delay effect with a delay time of up to 10 seconds.
ECHO
Delay effect with warm sound, up to 10 second delay time.
FIX-WAH
Changes the wah frequency in sync with rhythm tempo.
ARRM-PIT
Changes the pitch in sync with rhythm tempo.
Parameter description
Parameter
DEPTH
RATE
MIX
FB
POSITION
COLOR
CLIP
FLT TYPE
RESONANC
SENS
SHIFT
TONE
BALANCE
TIME
CURVE
FREQ
LowBoost
SIZE
WET LVL
DRY LVL
ZOOM MRS-1608
DEPTH RATE
POSITION RATE
POSITION RESO
FREQ DEPTH
SIZE TONE
TIME WET LVL
TIME FB
TIME FB
FLT TYPE POSITION
TYPE TONE
Setting range
EXCITER: 0 – 30
Others: 0 – 10
TREMOLO: 1 – 30, T 4 – T 1/8
FLANGER, PHASER:
1 – 30, T 4x4 – T 1/8
Others: 1 – 30
0 – 30
FLANGER: -10 – 10
DELAY, ECHO: 0 – 10
AFTER, BEFORE
4Stage
Invert4
8Stage
Invert8
0 – 10
BPF, LPF
AUTO WAH, CRY: 1 – 10
STEP: 0 – 10
-10 – -1, 1 – 10
-24.0 – 12.0
0 – 10
0 – 30
SLOW-ATK: 1 – 30
WIDE: 1 – 64
DELAY, ECHO:
1 – 10000, T 4x4 – T 1/4
0 – 10
EXCITER: 1 – 5
FIX-WAH: 1 – 50
0 – 10
1 – 10
0 – 30
0 – 30
RESONANC
BALANCE
SENS
LowBoost
MIX
DRY LVL
MIX
MIX
FREQ R MODE
R WAVE R SYNC
Adjusts the depth of the effect.
Adjusts the speed of the effect. The "T x" setting results in sync with the rhythm
tempo.
Adjusts the mix amount of the effect.
Adjusts the amount of feedback.
Selects the module location from AFTER; after the 3 BAND EQ module and
BEFORE; before the PRE AMP/DRIVE module.
Specifies the type of phase tone.
4-stage phaser
4-stage phaser with inverted feedback
8-stage phaser
8-stage phaser with inverted feedback
Emphasizes the effect.
Specifies the filter type.
Adjusts the effect character intensity.
Adjusts the effect sensitivity.
Adjust the pitch shift amount. The value "1.0" corresponds to semitone.
Adjusts the tone.
Adjusts the balance between the direct sound and effect sound.
Adjusts the attack speed.
Adjusts the delay time in 1-ms steps. The "T x" setting results in sync with the
rhythm tempo.
Adjusts the attack curve.
Adjusts the frequency.
Adjusts wah effect center frequency.
Emphasizes the low frequency range.
Adjusts the spatial width.
Adjusts the mix amount of the effect sound.
Adjusts the mix amount of the direct sound.
R WAVE
Description
Appendix
R SYNC
193