Zoom MRS-1608 Operation Manual page 30

Quick Tour
Track parameter list
Parameter
EQ HI GAIN
[EQ HIGH] key
EQ HI FREQUENCY
EQ MID GAIN
EQ MID
[EQ MID] key
FREQUENCY
EQ MID
Q-FACTOR
EQ LOW GAIN
[EQ LOW] key
EQ LOW
FREQUENCY
CHORUS/DELAY [CHORUS/DELAY
SEND] key
SEND LEVEL
REVERB SEND [REVERB SEND]
LEVEL key
SUB-OUT SEND
ON/OFF
SUB-OUT SEND
LEVEL [SUB-OUT SEND]
key
SUB-OUT SEND
PAN
PAN [PAN] key
[V-TAKE] key
V-TAKE
FADER
STEREO LINK
None
INVERT
30
Corresponding
key
EQ HI G
EQ HI F
EQ MID G
EQ MID F
EQ MID Q
EQ LO G
EQ LO F
CHO SEND
REV SEND
SUB SEND
SUB SEND LVL
SUB SEND Pan
PAN
TR
FADER
ST LINK
INVERT
Display Setting range
-12 – +12dB
500 – 18000(Hz)
-12 – +12dB
40 – 18000(Hz)
0.1 – 1.0
-12 – +12dB
40 – 1600(Hz)
0 – 100
0 – 100
ON/OFF
0 – 127
L100 – 0 – R100
L100 – 0 – R100
x=1 – 16
x-y
y=1 – 10
0 – 127
ON/OFF
ON/OFF
Description
Adjusts high frequency range boost/
cut.
Adjusts center frequency for high
frequency range boost/cut.
Adjusts mid frequency range boost/
cut.
Adjusts center frequency for mid
frequency range boost/cut.
Adjusts the Q value (bandwidth) for
mid-frequency EQ.
Adjusts low frequency range boost/
cut.
Adjusts center frequency for low
frequency range boost/cut.
Adjusts signal volume sent to chorus/
delay effect.
Adjusts signal level sent to reverb
effect.
Selects whether the STEREO SUB-
OUT jack carries the same signal as
the MASTER OUTPUT jacks. This
parameter can be selected only for
the master track.
Adjusts the level of the signal sent
from tracks 1 – 16, drum/bass track,
and input to the STEREO SUB-OUT
jack. This parameter is not shown
when the SUB-OUT SEND ON/OFF
parameter for the master track is ON.
Adjusts the panning value of the
signal sent from tracks 1 – 16, drum/
bass track, and input to the STEREO
SUB-OUT jack. This parameter is
not shown when the SUB-OUT
SEND ON/OFF parameter for the
master track is ON.
Adjusts panning for the track. For
stereo tracks, this adjusts the left/
right balance.
Selects V-take to use for the track. x
is the track number and y is the V-
take number.
Adjusts the current volume.
Links the parameters for two mono
→
tracks ( p. 82).
Selects whether the output signal
phase is inverted. OFF means normal
phase and ON means inverted phase.
ZOOaM MRS-1608