Fade-In/Fade-Out Of A Specified Data Range - Zoom MRS-1608 Operation Manual

Multitrack recording studio
Table of Contents

Advertisement

be played.
5.
Press the [ENTER] key.
The indication "TRIM SURE?" appears on the display.
6.
To execute the trimming operation, press
the [ENTER] key.
When the trimming operation is completed, the unit
returns to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Fade-in/fade-out of specified data
range
You can fade in or fade out the audio data over a specified
range.
Fade-in
NOTE
The fade-in/out command does not simply alter the track
volume. Rather, it rewrites the waveform data and is
therefore not reversible once executed.
1.
Refer to steps 1 – 6 of "Basic steps for
range editing" to select the track/Vtake for
fade-in or fade-out, and press the [ENTER]
key.
The indication "Fade Src START" appears on the display.
Fade Src
Fade Src
START
START
0 0 0 0 0 0 0 001
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the fade-in or fade-out start
point.
3.
Press the [ENTER] key.
The display indication changes to "Fade Src END".
ZOOM MRS-1608
001 1 1 0 0 00 00
Fade Src
Fade Src
END
END
0 0 024 24230
230 018
4.
Use the same procedure as in step 2 to
specify the fade-in or fade-out end point.
5.
Press the [ENTER] key.
The indication "Fade Src CURVE" appears on the
display.
Fade Src
Fade Src
CURVE
CURVE
6.
Turn the dial to select the fade-in or fade-
out curve.
Curves IN-1 to IN-3 are for fade-in, and curves OUT-1 to
OUT-3 are for fade-out. The three different kinds of
curves look as follows.
Fade-in
IN-1
Fade-out
OUT-1
7.
Press the [ENTER] key.
The indication "FADE I/O SURE?" appears on the
display.
8.
To execute the fade-in/fade-out operation,
press the [ENTER] key once more.
When the fade-in/fade-out operation is completed, the
unit returns to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Reference [Track Editing]
018 2 2 12 12 00 00
IN-1
IN-1
IN-2
IN-3
OUT-2
OUT-3
53

Advertisement

Table of Contents
loading

Table of Contents