Swapping Track Data And Captured Data; Zoom Mrs - Zoom MRS-1608 Operation Manual

Reference [Track Editing]
Swapping track data and captured
data
You can swap the current data of a track with the captured
data.
1.
From the main screen, press the [UTILITY/
TRACK EDIT] key in the display section.
The indication "UTILITY TR EDIT" appears on the
display.
2.
Use the cursor left/right keys to bring up
the indication "UTILITY CAP/SWAP" on the
display, and press the [ENTER] key.
3.
Use the status keys or the dial to select a
track that was captured.
When you select a captured track, the indication "SWAP"
appears on the display.
SWAP SWAP
TR1 TR1
HINT
If you select a track that was not captured, the indication
"CAPTURE" appears.
4.
Press the [ENTER] key.
The indication "SWAP SURE?" appears on the display.
5.
To carry out the swap operation, press the
[ENTER] key once more.
When the operation is completed, the audio data of the
selected track will have been replaced by the previously
captured audio data.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
66
HINT
By performing the swap operation once more, you can return
the track contents to the previous condition.
6.
To return to the main screen, press the
[EXIT] key several times.

ZOOM MRS-1608