Zoom MRS-1608 Operation Manual page 144

Reference [Effects]
NOTE
• The indications shown in the table on the previous page are
for the condition where the effect module is on. When the
effect module is off, the indication "-OFF-" is shown on the
second line.
• The 8x COMP EQ algorithm does not include a ZNR module.
4.
To change the effect type of the currently
selected effect module, turn the dial.
For effect modules which comprise multiple effect types, the
name of the currently selected effect type is shown on the
second line of the display. When you turn the dial in this
condition, the effect type changes.
MOD/DLY MOD/DLY
FLANGER FLANGER
Effect type name
HINT
If the contents of a patch have been changed, the "EDIT"
indicator in the upper part of the display will change to
"EDITED". When the setting is returned to the original condition,
the indicator reverts to "EDIT".
5.
Use the cursor up/down keys to select the
effect parameter that you want to edit.
The following diagram shows an example of what appears
on the display when you have selected the DEPTH
parameter of the "FLANGER" effect.
FLANGER FLANGER
DEPTH DEPTH
HINT
To reselect the effect type, repeatedly press the cursor up key to
bring up the effect type name, and then turn the dial.
6.
Turn the dial to change the setting value.
For details on the effect types that can be selected for each
effect module and on the effect parameters of each type,
refer to the information in the appendix of this manual.
144
2 2
Setting value
7.
To toggle the effect module on or off, bring up
the indication for the module on the display,
and then press the [ENTER] key.
When the effect module is turned off, the indication "-OFF-"
is shown on the second line of the display. Pressing the same
key once more returns the module to the active condition.
FLANGER FLANGER
-OFF- -OFF-
HINT
In the 8xCOMP EQ algorithm, the effects in the respective
channels cannot be switched on or off together in a single step.
However, when the setting for the respective effect is shown,
simply pressing the [ENTER] key will toggle the effect between
on and off.
NOTE
The modules included in TOTAL cannot be turned off.
8.
Repeat steps 3 – 7 as necessary to edit other
modules.
9.
To adjust the patch level (the final volume of
the patch), press the [TOTAL] key, use the
cursor left/right keys to bring up the
indication "TOTAL PAT LVL", and turn the dial.
The patch level can be adjusted in the range from 1 to 30.
TOTAL TOTAL
PAT LVL PAT LVL
10.
When you have finished editing, press the
[EXIT] key.
The insert effect patch select screen appears again.
NOTE
Keep in mind that if you select another patch without first storing
the edited patch, the changes will be lost. To keep the results of
your editing session, refer to the following section.
23 23
ZOOM MRS-1608