Creating A Cd Using The Disc-At-Once Method; About Track-At-Once And Disc-At-Once; Creating An Audio Cd By Album - Zoom MRS-802 Supplemental Manual

Creating a CD using the disc-at-once method

About track-at-once and disc-at-
once
The MRS-802 Version 2.0 offers two ways of creating an
audio CD from an album. The track-at-once method
inserts blank gaps between tracks on an audio CD, while
the disc-at-once method writes tracks continuously
without gaps. Using disc-at-once, you can create a non-
stop disc or a disc of a live performance that allows
skipping by song units. For both methods, finalizing is
carried out automatically at the end, so adding material to
the CD later is not possible. The characteristics of track-
at-once and disc-at-once are described in detail below.
●
Track-at-once (TAO)
The master tracks of projects registered in the album
are written to the CD one by one, while inserting gaps
between them. When a CD written with track-at-once
is played on a CD player, a mute section of two seconds
follows each track. This method is suitable for creating
a regular music CD where each track is separated by
blanks.
●
Disc-at-once (DAO)
The master tracks of projects registered in the album are
written to the CD in a single operation without gaps.
When a CD written with disc-at-once is played on a CD
player, the disc plays through without interruption,
because the multiple tracks are joined seamlessly.
If necessary, you can use marks as PQ subcode
information (indicating track start/end points and other
information) to divide a single project into multiple
tracks for creating the audio CD. This is convenient to
make a CD of a continuous live performance where the
listener can still jump to specific songs.
HINT
If you burn the CD with disc-at-once, but still want to have
blanks between specific songs, you should add a blank
portion to the master track of each respective project.
ZOOM MRS-802 Ver 2.0

Creating an audio CD by album

Because the MRS-802 Version 2.0 lets you select
between track-at-once (TAO) and disc-at-once (DAO) for
writing the audio CD, the procedure for creating an audio
CD by album changes as follows.
HINT
You can include playlist information created with the
sequence play function in the album (
NOTE
Before starting the procedure, use the trimming function on
the V-takes to be used as source material.
1.
Insert a CD-R/RW disc into the integrated
CD-R/RW drive.
Use a blank CD-R/RW disc or a CD-RW disc that has
been completely erased.
2.
Verify that the V-takes you want to use for
the audio CD are selected for the master
tracks of the projects.
3.
From the main screen, press the [CD-R/
RW] key in the display section.
The CD-R/RW menu appears.
4.
Verify that "CD-R/RW AUDIO CD" is shown
on the display and press the [ENTER] key.
The display indication changes as follows.
AUDIO CD AUDIO CD
BURN CD BURN CD
5.
Use the cursor left/right keys to bring up
the indication "AUDIO CD ALBUM" on the
display, and press the [ENTER] key.
In this condition, you can select the write method.
ALBUM ALBUM
TYPE:DAO TYPE:DAO
→
P.10).
7