Parameters For Install Operation (Installing Additional Channel Adapters) - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

{DKA-2NL,DKF 4MP,4}],Num. of DKAs=4
+{DKU,AC-BOX}=[{DKU-R1,3-phase AC Box(30A)}],Num. of DKUs=1
+FSW=[FSWR10-L,FSWR10-U,FSWR11-L,FSWR11-U,FSWR12-L,FSWR12-U,FSWR13-L,FSWR13-U,FSWR18-L,
FSWR18-U,FSWR19-L,FSWR19-U,FSWR1A-L,FSWR1A-U,FSWR1B-L,FSWR1B-U],Num. of FSWs=16
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-1,RAID1 (2D+2D),
DKR2F-J300FC,OPEN-V,3-3,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x00,OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-2,RAID5 (3D+1P),
DKR2F-J300FC,OPEN-V,-,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x10,OPEN-V,1688650752,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-3,RAID1 (2D+2D),
DKR2F-J300FC,OPEN-V,3-1,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x01,OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+Num. of PGs=3
+{B4,SPARE,Drive Type}=[{3,1,DKR2F-J300FC}],Num. of SPAREs=1
This logged information indicates that the formatting was only requested, but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
[Install]
Install function
Install
Install operation
No parameter
No parameter is selected in the example above. This operation uses the following parameters, as
shown in Table 122.
Table 122 Parameters for Install Operation (Installing Additional Channel Adapters)
Parameter
Progress Close
Quick Format
Quick Format Close
NOTE:
No parameters are selected for any case other than those described in this table.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
162 Install Function
Description
The progress window of LDEV format when LDEV is added is
closed.
Quick Format was selected when LDEV is added.
The progress window of preparing for Quick Format is closed.