Set Fibre Topology Operation; Set Fibre Address Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 146 Set Fibre Address Operation
Item
Port
Fibre Addr.
Num. of Ports

Set Fibre Topology Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Fibre Topology,,Normal end,,,Seq.=xxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P},
{XX,Disable,P-to-P}],Num. of Ports=4
[Install]
Install function
Set Fibre Topology

Set Fibre Topology operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 147 Set Fibre Topology Operation
Item
Port
Fabric
Connection
Num. of Ports
Description
The name of the port that the fibre address has been set.
The address of Fibre Channel port after change using a number from 1 to 126.
See Table 187 on page 212 for relation of number and Fibre Channel port address.
The number of ports where address has been set.
Description
The name of the port where the topology of Fibre Channel is set.
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
The number of ports where the topology of Fibre Channel is set.
XP24000/XP20000 Audit Log User and Reference Guide
Table 146.
Table 147.
181