39 Virtual Lvi / Virtual Lun (Vll) Function; Install Customized Volume (Cv) Operation; Parameters For Install Cv Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

39 Virtual LVI / Virtual LUN (VLL) Function

Install Customized Volume (CV) Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Install CV,,Normal end,,,Seq.=xxxxxx
+{PG,LDKC:CU:LDEV,Start LBA,Emulation,Size,Unit,System Disk }=
[{XX-XX-(X),0xXX:0xXX:0xXX, XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable},
{X-X-(X),0xXX:0xXX:0xXX,XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable}],Num. of LDEVs=2
[VLL]
Virtual LVI / Virtual LUN function
Install CV
Install Customized Volume (CV) operation
No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table
Table 280 Parameters for Install CV Operation
Parameter
Non Format
Quick Format
NOTE:
No parameters are selected for any case other than those described in this table. The logged information
indicates that the formatting was only requested, but not finished.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
280.
Description
Unformatted Install CV. The logged information indicates that the volume was created.
Quick Formatted Install CV. The logged information indicates that the formatting was
only requested, but not finished.
XP24000/XP20000 Audit Log User and Reference Guide 307