Blockpaths(Fibre) Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
VolumeID2
Device
Capa(blocks)
ExGroup
PathGroup
CLPR
Emulation
Cache
Inflow
Result
Port
WWN
LUN
Num. of Paths
LDKC:CU:LDEV
LDEVCapa(blocks)
SSID
Num. of LDEVs
Num. of Volumes

BlockPaths(FIBRE) Operation

This logged information indicates that the Disconnect-Paths operation was only requested, but not
finished .
130 XP External Storage Software Function
Description
The identification character 2 of the mapped external volume
The device name that the mapped external volume notifies to the host
The capacity of the mapped external volume indicated by blocks
The number of the external volume group and the reference number assigned to the
external volume of the mapped external volume. The number on the left of a dash (-) is
the external volume number and the number on the right of the dash (-) is the reference
number of the group.
The path group number of the mapped external volume
The CLPR number of the mapped external volume
The emulation type of the mapped external volume
The cache mode of the mapped external volume
Enable: Enabled, Disable: Disabled
The inflow control set to the cache of the mapped external volume
Enable: Enabled, Disable: Disabled
The result of the operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The port name of the external port of the local storage system
The WWN of the Target port of the external storage system
The LUN of the external volume
The number of mapping path (Port-WWN-LUN) configured
The LDKC, CU, and LDEV numbers of the LDEVs in the mapped external volume. The
number on the left of the colon is an LDKC number, the number between the colons is a
CU number, and the number on the right of the colon is an LDEV number
The capacity of LDEVs in the mapped external volumes indicated by blocks
The SSID
The number of LDEVs in the mapped external volumes
The number of mapped external volumes