Set Auto Plan Param Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 290 Set Auto Plan Param Operation
Item Description
The executed operation.
Default: The default auto migration plan is applied (click the Default button, and then
SetType click the Set button).
Customize: The customized auto migration plan is applied (click the Set button after
changing the value of the auto migration plan parameter).
Indicates whether the auto migration plan settings are enabled or disabled.
PlanSwitch
Disable or Enable is output.
The specified sampling term.
One of these values is output:
•
PlanType •
•
•
•
The setting value for sampling term. The output value depends on the sampling term
output to PlanType.
•
•
PlanDay
•
•
•
The target time zone for the sampling. The left side of the hyphen (-) indicates the start
MonitorPeriod
time of sampling, and the right side indicates the end time.
The target data for making plan (the range of the usage rate that is analyzed by the auto
migration function)
SampleCount
All: All sampling data
XX: The sampling data from the first to 96th.
Num. of Data The number of setting. 1 is always output.
None
Every day
Once every X days (For the value of X, see PlanDay index below)
Once a week
Once a month
If None is output to PlanType, nothing is output to PlanDay.
If Every day is output to PlanType, nothing is output to PlanDay.
If Once every X days is output to PlanType, the sampling interval is indicated.
If Once a week is output to PlanType, the specified day of the week is output to
PlanDay. SUN, MON, TUE, WED, THE, FRI, or SAT is output.
If Once a month is output to PlanType, the specified day from 1 to 31 is output to
PlanDay
XP24000/XP20000 Audit Log User and Reference Guide
Table 290.
315