Script Operation; Parameters For Script Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
TS
Range
Error Level
Result
Num. of Pairs

Script Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Script Operation,Run,,Normal end,Seq.=xxxxxx
+FileName=script.spt
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Script Operation
Script Operation operation
Run
Run is selected as the parameter. This operation uses the following parameters, as shown in
262.
Table 262 Parameters for Script Operation
Parameter
Run
Stop
End
Normal end
Description
Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair
is restored. This value is output only when the synchronous pair is restored. When the
asynchronous pair is restored, a hyphen (-) is output.
Enable: transferred, Disable: not transferred
The resume range set (the range to restore the asynchronous pair). This value is output
when the asynchronous pair is restored only.
Volume: Volume (appropriate TrueCopy for Mainframe Asynchronous pairs only)
Group: Group (all suspended TrueCopy for Mainframe Asynchronous pairs in the
consistency group)
The error level set (handling if trouble occurs)
This value is output when the asynchronous pair is restored only
Volume: Volume (appropriate TrueCopy for Mainframe Asynchronous pair only)
Group: Group (all suspended TrueCopy for Mainframe Asynchronous pairs in the
consistency group)
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of restored pairs
Description
The script has been executed.
The script has been suspended.
The script has been completed.
XP24000/XP20000 Audit Log User and Reference Guide
Table
289