19 XP External Storage Software Function
AddVolume(FIBRE) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],AddVolume(FIBRE),,),,Normal end,,,Seq.=xxxxx
+{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,Capa(blocks),ExGroup,PathGroup,CLPR,
Emulation,Cache,Inflow,Result}={HITACHI,9500V,28528,0001,
0000000000000000000000000000000000000000000000000000000000000000,DF600F,4294967296,
E1-1,1,0,OPEN-V,Enable,Disable,Normal end}
++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0001},{2A,50560E8000C3E212,0x0001},
{3A,50560E8000C3E213,0x0001},{4A,50560E8000C3E214,0x0001}],Num. of Paths=4
++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x00:0x00,96000},{0x00:0x00:0x01,96000,0x00D8}],
Num. of LDEVs=2
+{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,Capa(blocks),ExGroup,PathGroup,CLPR,
Emulation,Cache,Inflow,Result}={HITACHI,9500V,28528,0001,
0000000000000000000000000000000000000000000000000000000000000000,DF600F,4294967296,
E1-1,1,0,OPEN-V,Enable,Disable,Normal end}
++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0002},{2A,50560E8000C3E212,0x0002}],
Num. of Paths=2,
++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x01:0x00,4294967296,0x00D8}],Num. of LDEVs=1
+Num. of Volumes=2
[Ext Stor]
HP XP External Storage Software function
AddVolume(FIBRE)
AddVolume(FIBRE) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 83 AddVolume(FIBRE) Operation
Item
Vendor
Product
Serial
VolumeID1
Description
The name of the vendor of the external storage system where the mapped external volume
exists
The product name of the external storage system where the mapped external volume
exists
The serial number the external storage system where the mapped external volume exists
The identification character 1 of the mapped external volume
XP24000/XP20000 Audit Log User and Reference Guide
Table
83.
129