Volume Initialize Operation; Parameters For Volume Initialize Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Volume Initialize Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VLL],Volume Initialize,,Normal end,,,Seq.=xxxxxx
+{PG,LDKC:CU:LDEV}=[{XX-XX-(X),0xXX:0xXX:0xXX},{XX-XX-(X),0xXX:0xXX:0xXX}],Num. of PGs=2
[VLL]
Virtual LVI / Virtual LUN function
Volume Initialize

Volume Initialize operation

No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table
Table 286 Parameters for Volume Initialize Operation
Parameter
Non Format
Quick Format
NOTE:
No parameters are selected for any case other than those described in this table. The logged information
indicates that the formatting was only requested, but not finished.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 287 Volume Initialize Operation
Item
PG
LDKC:CU:LDEV
Num. of PGs
286.
Description
Unformatted Volume Initialize. The logged information indicates that the volume was
created.
Quick Formatted Volume Initialize. The logged information indicates that the formatting
was only requested, but not finished.
Description
The parity group numbers
The parity group number whose first letter is E indicates that an external volume is present
in the parity group.
The LDKC, CU, and LDEV numbers
None is output when the LDKC, CU, and LDEV numbers are not specified
The number of parity groups
XP24000/XP20000 Audit Log User and Reference Guide
Table 287.
311