Change Option Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
Timer Type

Change Option Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Change Option,,Normal end,,,Seq.=xxxxxx
+{ Parallel Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s),
Service SIM,
Parallel Initial Copy(CU)}={128,45,70,Not Report,Disable}
+{LDKC,CU,Service SIM,PPRC Support,SCP Time(s), Parallel Initial Copy(CU)}=
-{0x00,0x00,Not Report,Yes,600,4},{0x00,0x01,Not Report,Yes,600,4},{0x00,0x02,
Not Report,
Yes,600,4},{0x00,0x03,Not Report,Yes,600,4},{0x00,0x04,Not Report,Yes,600,4},
(snip)
-(snip), Num.of CUs=255
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Change Option

Change Option operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 256 Change Option Operation
Item
Parallel Initial Copy
Path Blockade
Watch(s)
Path Blockade SIM
Watch(s)
Service SIM
Parallel Initial Copy
(CU)
LDKC
CU
Description
The timer type set.
System: System timer, Local: Local timer, None: No timer (system timer)
Description
The maximum number of initial copy operations set. (1 to 512)
The path blockade watch period set. The unit is second.
The path blockade SIM watch period set. The unit is second.
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
Indicates whether the parallel operation of initial copy by CU is enabled or not.
Enable, Disable
The LDKC number.
The CU number of the CU on the primary site.
XP24000/XP20000 Audit Log User and Reference Guide
Table 256.
283