Inflow-Control Operation; Dividepathgroup Operation; Parameters For Inflow-Control Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

DividePathGroup operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 92 DividePathGroup Operation
Item
PathGroup
NewPathGroup
ExGroup
Result
Num. of Volumes

Inflow-Control Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],Inflow-Control,Enable,
Normal end,,,Seq.=xxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num. of Groups=XXX
[Ext Stor]
HP XP External Storage Software function
Inflow-Control
Inflow-Control operation
Enable
Enable is selected as the parameter. The operation uses the parameters shown in
Table 93 Parameters for Inflow-Control Operation
Parameter
Enable
Disable
Normal end
The operation has ended normally.
Description
The path group number of the original path group.
The path group number of a newly created path group.
The external volume group number of the external volumes moved to the new
path group. The format is group number-sequential number of the group.
The result of the operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of the external volumes moved to the new path group.
Description
The cache memory is used.
The cache memory is not used.
XP24000/XP20000 Audit Log User and Reference Guide
Table 92.
Table 93.
137