Pool Change/Delete Operation; Emulation Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Detailed information displays for this operation, as shown in
Table 304 Emulation Operation
Item
Mode

Pool Change/Delete Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VVOL],Pool Change/Delete,,Normal end,,,Seq.=xxxxx
+{Command,Pool ID,Pool Type,Threshold(%), Result}=[{ Change,1,1,20% ,
Normal end}, { Change,2,1,20% , Normal end },{ Change,3,1,20% ,Normal end }]
Num. of Pools = 3
[VVOL]
V Volume function
Pool Change/Delete
Pool Change / Delete operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 305 Pool Change/Delete Operation
Item
Command
Pool ID
Pool Type
332 V Volume (VVOL) Function
Description
Indicates the change of emulation mode.
0: Changes the emulation mode of an LDEV that a path is not defined, from Open 0V
to Open V. (Normal mode).
1: Changes the emulation mode of an LDEV regardless of path definition, from Open
0V to Open V. (Forceful mode)
2: Changes the emulation mode of an LDEV that a path is not defined, from Open V to
Open 0V. (Normal mode)
3: Changes the emulation mode of an LDEV regardless of path definition, from Open V
to Open 0V. (Forceful mode)
Description
The operation to the pool.
Change: Changing pool information
Delete: Delete pool
The pool ID of the pool where the settings have been changed or the number of the pool
that have been deleted.
The pool type. 1 is always output.
This index is output only when pool information is changed.
1: HP XP Snapshot, 2: HP XP Thin Provisioning Software
Table 304.
Table 305.