HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual page 25

Transferring the audit log information file could fail due to the failures of either the FTP server or LAN
problems even though the configuration of the FTP server has finished. If the transfer fails, the Audit:
Warning or the Audit: Wraparound button will remain displayed on the Remote Web Console main
window.
Resolve the error condition on the FTP server or LAN, and then manually transfer the audit log
information file manually by clicking Transfer on the Audit Log Transfer window.
If the error condition cannot be resolved, download the audit log information file to the Remote Web
Console computer manually by clicking Audit:Warning or Audit: Wraparound.
To transfer the audit log information file to the FTP server:
1. Ensure that the SVP of the storage system is connected to FTP server on a LAN.
2. Log on as a storage administrator and open the Remote Web Console main window.
3. Change to Modify mode.
4. Click Go-Security-Audit log Transfer in the menu bar of the Remote Web Console main window.
The Audit Log Transfer window displays. (see
5. Select one of the following:
• If using a primary FTP server:
• Select Enable in Output to Primary Server.
• Enter the IP Address in the Primary Server Setting. Do not enter the periods.
• Enter the User ID and the Password you use to login the primary FTP server.
• Enter the output folder where the audit log information file will be sent. Specify a relative
directory from the home directory as that folder.
• If using a secondary FTP server:
• Click Enable in Output to Secondary Server.
• Enter the IP Address in the Secondary Server Setting. Do not enter the periods.
• Enter the User ID and the Password you use to login the secondary FTP server.
• Enter the output folder where the audit log information file will be sent. Specify a relative
directory from the home directory as that folder.
6. Click Apply. A confirmation message will display.
7. Click OK.
8. Confirm that the FTP server setting is correct, and then click Transfer and manually transfer the
audit log information file.
A message displays indicating that the transfer has completed.
There are cases, such as when an SVP is replaced, that will require the input of the configuration in
the Audit Log Transfer window again. Keep a list of the items you entered in the Audit Log Transfer
window, such as the IP address.
Follow the steps below to transfer the audit log information file from the SVP to the FTP server manually.
1. Log on as a storage administrator and open the Remote Web Console main window.
2. Click Go Security
window. The Audit Log Transfer window (see
3. Click Audit Log Transfer in the Audit Log window.
A message displays indicating that the transfer has completed.
Audit log Transfer in the menu bar of the Remote Web Console main
XP24000/XP20000 Audit Log User and Reference Guide
Figure 1).
Figure 1) displays.
25