Set Migration Vol Operation; Set Fixed - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Detailed Information
Detailed information displays for this operation, as shown in
Table 292 Set Fixed PG Operation
Item
Type
PG
Num. of PGs

Set Migration Vol Operation

This logged information indicates that the migration was only requested, but not finished. For
information on using XP Auto LUN, see the HP StorageWorks XP24000/XP20000 Auto LUN Software
User's Guide.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Set Migration Vol,,Normal end,,,Seq.=xxxxxx
+{Instruction,SourceLDEV,TargetLDEV,OwnerID,Result}=[{Create,0x00:0x00:0x00,0x00:
0x00:0x01,
0xFF,Normal end},{ Create,0x00:0x00:0x02,0x00:0x00:0x03,0xFF, Error(XXXX-YYYY) end },
{ Create,0x00:0x00:0x04,0x00:0x00:0x05,0xFF,Normal end},
{ Create,0x00:0x00:0x06,0x00:0x00:0x07,0xFF, Error(XXXX-YYYY) end }] Num. of LDEVs =4
[Auto LUN]
HP XP Auto LUN Software function
Set Migration Vol

Set Migration Vol operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 293 Set Migration Vol Operation
Item
Instruction
SourceLDEV
Description
The executed operation to the parity group.
Set: Set to the fixed parity group, Release: Set to the normal parity group.
ID of the parity group whose settings are changed.
The number of parity groups whose settings are changed.
Description
Indicates that the manual migration plan is set or deleted; Create: Set, Delete: Deleted
The logical volume ID of the migration source. The number on the left of the colon is an
LDKC number, the number between the colons is a CU number and the number on the
right of the colon is an LDEV number.
XP24000/XP20000 Audit Log User and Reference Guide
Table 292.
Table 293.
317