Delete Path Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,4}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID}={99999,0x00,0x3F,0x00,0x7F,0x0004,5}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num of Port Pairs=8
[RCU]
Remote Control Unit function
Delete Path

Delete Path operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 237 Delete Path Operation
Item Description
S/N The serial number of the device of RCU where the path has been deleted.
MCU LDKC The LDKC number of the connected LDKC.
RCU LDKC The LDKC number of the paired LDKC.
The path group ID of the path deleted. When the path group is a default setting, Default
Path Gr.ID
is output.
Controller ID The controller ID of the RCU where the path has been deleted.
MCU The CU number of the connected CU.
RCU The CU number of the paired CU.
SSID Indicates SSID.
MCU Port The port number of MCU.
RCU Port The port number of RCU.
Num of Port Pairs The number of path pairs deleted.
XP24000/XP20000 Audit Log User and Reference Guide
Table 237.
261